Clamping Tools - EN / Hahn+Kolb

Magnetic clamping technologyMagnetic clamping accessoriesMetal-cutting toolsContinued next pageLamellar bars and supporting plates with transverse pole pitch (without own magnetic field)accessory for magnetic clamping platesApplication: in this way the potential applications of the magnetic clamping plates can be considerablyexpanded. The lines of force of a magnetic clamping plate are conducted through the lamellar bars to thework piece –with minimal loss – if the laminar plates are laid parallel to the poles of the plate. Loss of adhesiveforce approx. 1 %/mm height.The lamellar plates are placed loose on the clamping plate or fastened onto it. They offer, among otherthings, the possibility of making notches or machining profiles without damaging the magnetic clampingplate.Machining is then possible without affecting the stability in any direction.Supporting plates for permanent-magnetic round chucks on request.Length mm 250 500 250 400Width mm 75 100 150 75 75 100Height mm 25 25 25 25 40 40Pole pitch St/Nf mm 3/1 3/1 3/1 3/1 3/1 3/124430 Ident. No. 215 220 230 310 330 360Unit price E O. R. O. R. (O. R.) (O. R.) (O. R.) (O. R.)Lamellar bars forsupporting componentsh Other dimensions on request. Prod. Gr. 230Continued next pageLamellar bars with longitudinal pole pitch (without own magnetic field)accessory for magnetic clamping platesApplication: in this way the potential applications of the magnetic clamping plates can be considerablyexpanded. The lines of force of a magnetic clamping plate are conducted through the lamellar bars to thework piece –with minimal loss – if the laminar plates are laid parallel to the poles of the plate. Loss of adhesiveforce approx. 1 %/mm height.The lamellar plates are placed loose on the clamping plate or fastened onto it. They offer, among otherthings, the possibility of making notches or machining profiles without damaging the magnetic clampingplate.Machining is then possible without affecting the stability in any direction.Length mm 320 650 320Width mm 75 75 100Height mm 25 25 40Pole pitch St/Nf mm 3/1 3/1 3/124431 Ident. No. 110 120 130Unit price E O. R. (O. R.) (O. R.)Lamellar blocks enablethe machining of a veryunfavourably shaped part.h Other dimensions on request. Prod. Gr. 230Continued next pageLamellar blocks and supporting plates (without own magnetic field)accessory for magnetic clamping platesh On request.Parallel pole pitchRadial pole pitchContinued next pageClamping stripsApplication: to clamp non-magnetic materials on magnetic platesLength x width xmm 150 x 40 x 1,0 150 x 43 x 1,7 150 x 43 x 2,8 250 x 52 x 3,7height24495 Pair Ident. No. 100* 110 120 130Set price E O. R. O. R. O. R. O. R.1 2 3* Delivered without stop. Prod. Gr. 2651 elastic part of clamping strip 2 workpiece3 elastic part of clamping stripContinued next pageCleanersApplication: for magnetic clamping plates, tool tables etc. The indispensable helper in the workshop. L x W160 x 48 mm.Delivery: delivered as set = 5 pieces.Box qty.: 5 pieces24496 set = 5 pieces Ident. No. 010Set price E O. R.Prod. Gr. 265588 2011/12