Clamping Tools - EN / Hahn+Kolb

Lathe and rounding machine accessoriesLathe chucksContinued next pageAdditional and replacement jawsfor hand chuck No. 22425-22426, 22427-22428Application: on SCHUNK ROTA-S plus, RÖHM DURO-T and FORKARDT F plus hand chucks.No. 22437 Stepped jaws*, undivided, hardened.No. 22438 Plain jaws, hardened, for holding reverse interchangeable or soft jaw grips.No. 22439 Reverse jaw grips*, hardened, to screw onto plain jaws.No. 22440 Jaw grips, soft (steel or aluminium), for screwing onto plain jaws. They can be machined subsequently and adapted to the form of the workpieces.No. 22441 Block jaws (monobloc jaws), unhardened. They can be machined subsequently and adapted to the form of the workpieces.set = 3 piecesNo. 22443 Fastening screwsMetal-cutting toolsNo. 22437 No. 22438 No. 22439 No. 22440 No. 22441For chuck size 125 160 200 250 315 400/50022437 Ident. No. – 040 050 060 – –Set price E – (O. R.) (O. R.) O. R. – –22438 Ident. No. 030 040 050 060 070 080Set price E (O. R.) O. R. O. R. O. R. O. R. (O. R.)22439 Ident. No. – 040 050 060 070 080Set price E – O. R. O. R. O. R. (O. R.) (O. R.)22440 made of steel Ident. No. 030 040 050 060 070 080Set price E O. R. O. R. O. R. O. R. O. R. (O. R.)22440 made of special aluminiumIdent. No. – 140 150 160 – –Set price E – O. R. O. R. (O. R.) – –22441 Ident. No. – 040 050 060 – –Set price E – O. R. O. R. O. R. – –M 6 x 10 M 8 x 1,0 x 20 M 12 x 1,5 x 30 M 12 x 1,5 x 35 M 16 x 1,5 x 4022443 Attachment bolts Ident. No. 030 040 060 070 080Unit price E (O. R.) O. R. O. R. (O. R.) (O. R.)* Jaws purchased subsequently must be ground in the running chuck, to achieve precise running accuracy.h Fixing screws for fastening the jaws and the chip guard available on request.Prod. Gr. 222Continued next page3-jaw turning and grinding chucks ZG-Hi-Truwith radial fine adjustment for very small radial run-outApplication: for grinding machines, dividing apparatus and turning machines.Advantages: central tensioning via driving pinion, setting tolerance within 0.005 mm, concentricity tolerancewith repeated clamping and equal diameter 0.015 mm, fine adjustment without releasing chuckretaining screws, hardened adjusting spindles, induction hardened support surface for adjusting spindle,tool holder flange.Delivery: 1 set drilling jaws, 1 set turning jaws, 1 chuck key, 1 set retention screwsVery easy to handle. The clamped workpiece is set to the desired concentric deviation very sensitivelythrough 3 tangentially arranged setting spindles.Outside Ø A mm 80 100 125 160 200Height D mm 50,5 63 72 81 89,5Through-bore E mm 19 20 32 42 55Centre Ø/depth B/C mm 56/3 70/3 95/4 125/4 160/4Hole circle Ø F mm 67 83 108 140 176Fastening thread 3 x G M 6 M 8 M 8 M 10 M 1022451 Ident. No. 080 100 125 160 200Unit price E (O. R.) O. R. O. R. O. R. (O. R.)Middle of therotating spindleDisplacementClamping middleDIN 6350-1h Additional and spare jaws see No. 22389-22422 page 569.Larger chuck Ø on request.Prod. Gr. 2032011/12573