TOTAL STATION InstructIon manual

Aim at the reference point and press [ENT] to viewthe MEASURE screen.MeasuringAim at the Target point and press [F1][MEAS] tomeasure the distance.Press [F3][ME/SAVE] to measure and save themeasured data as sideshot point.Press [F2][SAVE] to save the measured data as sideshot point.When no PN is input, no survey data is saved.Press the [F4][EDIT] to edit the PN, Point Name,PH, Prism Height and PC, Point Code.Press [ENT] to view each input window by pressingthe up or down arrow key, and input your desiredpoint name or prism height or point code. Press[F5][ACCEPT], if the current PN, PH and PC are acceptable.Press the [ENT] to save the measured data as corner point. If [ENT] is pushed more thantwice at the one station, the last [ENT] point becomes next corner point.NOTE: Please use [SAVE] [ME/SAVE] and [ENT]properly by sideshot and corner point.Press [F5][PAGE] to view another menu.11.2 Corner point measuringSelect 2.CORNER POINT to start measuring atcorner point.And press [ENT] to view the STATION POINTSETUP screen.102