TOTAL STATION InstructIon manual

4.3 Function of MEASURE screenAim at the reference point and press [ENT] to viewthe MEASURE screen.Press the [F1][MEAS] to measure the Distance anddisplay the Coordinates.Press [F2][SAVE] to save the measured data.Press [F3][ME/SAVE] to measure and save the measured data.The survey data is not saved if no PN is input.Press [F4][EDIT] to edit the PN,Point Name,PH,Prism Height and PC,Point Code.Input your desired Point name, Prism height and Point code.Press [F5][ACCEPT] if the current PN, PH andPC are acceptable.If PointCode exists, you can easily select themfrom the list or edit one of them afterpressing the [ENT]. For using Point Code List,please refer to“5.4.1 Point Code”.Press [F5][PAGE] to view another menu.EDM settings can be selected by pressing[F1][EDM].For example, change 1.PRIM. MEAS KEY (MEAS)to TRACK SHOT or TRACK CONT if you want touse tracking measurement with primary MEAS key(MEAS).The target type can be selected by pressing [F2][TARGET].24