TOTAL STATION InstructIon manual

Select 1. SP and press [ENT] to view SP screen.Input PN (Point Name), X, Y, Z, and PC (Point Code) of SP point or import from thememory of rectangular coordinate as SP by [F2][LIST].If you finish the input of SP value, press[F5][ACCEPT].Then you go to EP input screen.Input EP value like an input of SP.If you finish an input of EP, press [F5][ACCEPT].Then you go to CP input screen.If you finish the input of CP value, press[F5][ACCEPT].Then you go to RADIUS input screen.If you finish the input of RADIUS, press [ENT].Then you go to RESULT OF LINE-ARCINTERSECTION screen.You can see the coordinates of one of intersectionpoint. You can switch to one more intersection pointby pressing [F3][ONE MORE].Press [F5][ENT] to save an intersection point.The PN, X, Y, Z and PC are viewed and can be edited.If all items are OK, press [F5][ACCEPT] to save them.73