TOTAL STATION InstructIon manual

13.1.3.2 Reading data settingSelect the 4. TextFile Setup and press [ENT] to viewthe TextFile Setup screen.Select the 3. Rect. Data Text Read and press [ENT]to view the following screen.Press [ENT] to open the selection window.Select each setting and press [ENT].Press [ACCEPT] to enter when all selections are finished.•DISP.# AXIS: BASIS DIRECT., RIGHT ANGLE, or HEIGHT is selected when datais transferred between the TS and PC. (cf.“14.2 Coordinate axis definition”)They are used for matching coordinate system between definition in the instrument anddefinition in the external device when they are different. However, it is necessary to matchthe definition of the “Coord. Axis” between setings in “Rect. Data Text Read” and setingsin “Coordinate axis definition” when same coordinate systems are used.•Factory default setting of RECEIVING1. DISP.1 AXIS: BASIS DIRECT.2. DISP.2 AXIS: RIGHT ANGLE3. DISP.3 AXIS: HEIGHT4. ROTATION: CW121