TOTAL STATION InstructIon manual

8.2 2D SurfaceZ3D CONTOURX2D SURFACE● STORED POINT2D CONTOURYThis function calculates the 2D and 3D contour of a polygon and the 2D surface of thearea defined by the polygon.You define the polygon by selecting points and PowerTopoLite then calculates contourand 2D surface.NOTE: The polygon is defined by the point you select. Therefore, the order in whichyou enter the point is important.If you select points by [ALL] or [FROM][TO], the polygon is defined according tothe order of the memory address. If you select points one by one by [ENT],polygon is defined according to the order of your selection.NOTE: You have to select points in such a way that the line segments that define the polygondo not intersect.NOTE: Selected points should be less than 500 points.From the PowerTopoLite screen, press [F2][CALC]to view the CALCULATION screen.85