TOTAL STATION InstructIon manual

7.3 Point to ArcSet station point(SP), target point(P) and an arbitrary circle, then obtain the distance frompoint P to the arbitrary circle.SOP->ARCthe distance from target point(P) to the circleWhen radius is 0, the figures of the distance between SOP and ARC is shown as a positivefigure. When point P is outside the circle, the figures of the distance between SOP and ARCis shown as a positive(+) figure.PARCO+When point P is inside the circle, the figures of the distance between SOP and ARC is shownas a negative(-) figureARCPOARC-Select 3. POINT TO LINE and press [ENT] to viewPOINT TO ARC screen.57