TOTAL STATION InstructIon manual

13.1.3 Text File setupWhen coordinate data is output/input to and fromtext file, input parameter.13.1.3.1 Writing data settingSelect the 4. TextFile Setup and press [ENT] to viewthe TextFile Setup screen.[1. WRITE RECT. DATA]Select the 1. Rect. Data Text Write and press [ENT]to view the following screen.Press [ENT] to open the selection window. Selecteach setting and press the [ENT].Press [ACCEPT] to enter when all selections are finished.•DISP.# AXIS: BASIS DIRECT, RIGHT ANGLE, or HEIGHT is selected when datais transferred between the TS and PC. (cf.“14.2 Coordinate axis definition”)They are used for matching coordinate system between definition in the instrument anddefinition in the external device when they are different. However, it is necessary to matchthe definition of the “Coord. Axis” between setings in “Rect. Data Text Write” andsetings in “Coordinate axis definition” when same coordinate systems are used.•Factory default setting of SENDING1. DISP.1 AXIS: BASIS DIRECT2. DISP.2 AXIS: RIGHT ANGLE3. DISP.3 AXIS: HEIGHT4. ROTATION: CW[2. WRITE POLAR DATA]Select the 2. Polar Data Text Write and press [ENT]to view the following screen.Press [ENT] to open the selection window. Selecteach setting and press [ENT].Press [ACCEPT] to enter when all selections are finished.•Factory default setting of 3. SEND POLAR DATA1. ROTATION: CW120