TOTAL STATION InstructIon manual

Input PN (Point Name), X, Y, Z, and PC (Point Code) of S1 point or import from thememory of rectangular coordinate as S1 by [F2][LIST].If you finish the input of S1 value, press[F5][ACCEPT]. Then you go to E1 input screen.Input E1 value like an input of S1.If you finish an input of E1, press [F5][ACCEPT].Then you go to S2 input screen.If you finish the input of S2 value, press[F5][ACCEPT].Then you go to E2 input screen.If you finish the input of E2, press [ENT]. Then yougo to RESULT OF LINE-LINE INTERSECTIONscreen.You can see the coordinates of one of intersectionpoint. You can switch to one more intersection pointby pressing [F3][ONE MORE].Press [F5][ENT] to save an intersection point.The PN, X, Y, Z and PC are viewed and can be edited.If all items are OK, press [F1][SAVE] or [F5][ACCEPT] to save them.75