TOTAL STATION InstructIon manual

FIXED TRAVERSESet the instrument in the order of 1, 2, 3 and 4,then make the measurement.431: [Start point]2 and 3: [Traverse points of Station P]4: [End point]12CLOSED TRAVERSESet the instrument in the order of 1, 2, 3 and 4,then make the measurement.431: [Start point]2, 3, 4: [Traverse points of Station P.]1, which is measured last, is [End point]2Example:1For point 1“Closing errors/Total length is the horizontal distance error at point 1 between measuredvalue and theoretical value.“Total length”is the distance measured in the order of 1-2-3-4-1For point 3“Length between last station P. & current P. ”is the distance between 2 and 3“Length between start P. & current P. ”is the distance measured in the order of 1-2-3OPEN TRAVERSESet the instrument in the order of 1 and 2,then make the measurement.431: [Start point]2: [Traverse point of Station P.]3 and 4: [Traverse points of not Station P.]2Example:For point 4“Length between last station P. & current P.”is the distance between 2 and 4.1106