TOTAL STATION InstructIon manual
TOTAL STATION InstructIon manual
TOTAL STATION InstructIon manual
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Press [ENT] to open the input window of PN, X, Y,Z and IH value.Input each Character or value and press[F5][ACCEPT] to view the <strong>STATION</strong> POINTH. ANGLE SETUP screen.Input the H. angle by pressing [F2][INPUT], [F3][0SET] and [F4] [HOLD] or BacksightCoordinates by pressing [F5][BSP].Press [ENT] to open the input window when using [F5][BSP].Pressing [F2][INPUT]Input any horizontal angle.Pressing [F5][BSP]The information for Back sight point is obtained.Press [ENT] to finalize the input.Aim at the reference point, and press [ENT] to viewthe MEASURE screen.Aim at point 1 and press [F1][ MEAS].Measured Coordinates are displayed.Press [ENT] to view the same MEASURE screen.In the same manner, aim at point 2 and press[F1][ MEAS].Measured Coordinates are displayed.94