TOTAL STATION InstructIon manual

If you select “LARGE CHARACTOR”, theinformation is shown with four screens and thesescreens and the Graphics screen can be switched by[F4][DRAW].Press [F5][PAGE] to view another screen.Press [F5][DISP] to change graphic view.[Point Name]SPOStation pointMeasurement pointDesign pointDEVIATION[DEVIATION Information]Display the distance and direction from point P toPoint OF(Forward) / B(Back)L(Left) / R(Right)U(UP) / D(Down)Forward/BackwardLeft/RightUp/DownFor more details on the operating procedure,refer to“5. VIEW AND EDIT”.Press [ENT] or [ESC] to return STAKEOUT screen.Example:Station X 0.000 mPoint Y 0.000 mS Z 0.000 mMeasurement H.angle 330°00′00″PointP H.dst 5.000 mV.dst 1.000 mDesign X 5.000 mPoint Y 5.000 mO Z 0.000 mB.: 3.170R.: 6.830D.: 1.000P330°SOIn this case, operator tells you to move 3.170m forward, 3.170m to the left and 1.000m downagainst Point P.53