TOTAL STATION InstructIon manual

NOTE:Don’t use the same point name (PN) for start point when you measure the start pointfrom the last corner point. For example, change “T1” to “T1-1” etc.Open traverseYou do not need to measure the corner point by pressing [ENT] for calculation at thelast corner point. The closing errors are not calculated.11.3 CalculationSelect “3.FIXED CALC.” or “4. CLOSED CALC.”or “5.OPEN CALC.” to calculate the traverse route.Press [ENT] to view the START POINT COORD.SETUP screen.Start point coordinates setup.(Input the PN, Coordinates and PC of the Start point.)[LIST] keyAll the stored points can be displayed as follows bypressing [F2][LIST].Press [F2][LIST] to view the POINT SELECTIONFROM THE LIST screen.Press [ENT] to open the X coordinate input screen.Input your desired value by pressing each keys andpress [ENT] to go Y coordinate.Press [ENT] to open the Y coordinate input screenand input.104