TOTAL STATION InstructIon manual

Press [F5][ENT] to save one of intersection point.The PN, X, Y, Z and PC are viewed and can be edited.If all items are OK, press [F5][ACCEPT] to save them.8.1.7 Distance offsetOffset P(-)OffsetEPNew PointSPDistance(+)Offset POffset distance of new point to the line and distance of start point to new point aredisplayed. Also new Point on the line is calculated by point of start, end, and offset.You can store the new point.Input: line: start point (SP) and end point (EP)offset point (OP)Output: new pointoffset of new point from the line(moving in the direction from start point to end point, right is positive,left is negative)distance of new point from start pointFrom the PowerTopoLite screen, press [F2][CALC]to view the CALCULATION screen.78