TOTAL STATION InstructIon manual

Press [ENT], and set the PC to be ready to receive.13.3.3 Communication setupThe communication parameter is set when storeddata is received or sent between the instrument andthe PC etc.13.3.3.1 Receiving data settingSelect the 4. COMMUNICATION SETUP and press[ENT] to view the COMM. SETTING SELECTION.[1. RECEIVE RECT. DATA]Select the 1. RECEIVE RECT. DATA and press[ENT] to view the following screen.Press [ENT] to open the selection window. Selecteach setting and press [ENT].Press [ACCEPT] when all selections are made.•DISP.# AXIS: BASIS DIRECT., RIGHT ANGLE, or HEIGHT is selected when datais transferred between the TS and PC. (cf.“14.2 Coordinate axis definition”)They are used for matching coordinate system between definition in the instrument anddefinition in the external device when they are different. However, it is necessary to matchthe definition of the “Coord. Axis” between setings in “Communication setup” andsetings in “Coordinate axis definition” when same coordinate systems are used.125