TOTAL STATION InstructIon manual

11. TRAVERSEFixed traverseEnd point(Coordinates)Back sight pointStart point(Coordinates)Direction angleKnown pointCorner pointSideshot pointThis function is for fixed, closed and open traverse calculations.You can measure not only the corner points but also the sideshot points at the same time.When the traverse is closed, the closing errors of coordinates are calculated and the cornerpoints can be adjusted. In addition, the sideshot points from the corner point based on theadjusted each corner point’s coordinates are calculated.One point of the traverse data uses the memory size of two or three coordinates data.Therefore, please check the remaining memory.The calculation type is the Compass Rule.The traverse function can store the polar coordinates data and the rectangular coordinates data.And it can send the polar data by DC1 or AUX format and rectangular data by DC1 or CSVformat respectively.98