PC3000 Complete Installation guide iss 12 - Elektro-Trading

Version compatibility
PC3000 - Installation Guide
Logic Output Module
This module is Version 3 and introdues a new style connector header and a change to
the numbering of the Status Indicator Leds.
Version 3 modules may be used in the old Version 2 or Version 1 rack together with
the enclosed new connector header.
Description
Provides twelve channels of Logic output (open collector, npn). Outputs are grouped
in group of four channels, each group having a separate common terminal.
The logic outputs have reinforced insulation to the "System" and other modules.
Reinforced insolation is NOT provided between the separate groups.
Caution live connections
Where one channel may be live, the installer must ensure that any other channel in
the same module, is not accessible to service personnel while it is live. The installer
must also ensure that this situation will not damage other connected equipment. All
cables, connectors and switches for connecting external equipment to an I/O point
that may be at live potential, must be mains rated.
Cleaning
Isopropyl alcohol may be used to clean the labels, do not use water or water based
products or they will become illegible.
A mild soap solution may be used to clean the exterior surfaces of this product.
Module identification
Module may be identified by means of a label visible through the top of the detachable
fascia carrying the text LGC 12.
Additionally, a label fitted to the side of the module carries details of serial number
etc. The module's product code is included and should read:
PC3000/DO/VERSION3/LGC12
17-1