PC3000 Complete Installation guide iss 12 - Elektro-Trading
PC3000 Complete Installation guide iss 12 - Elektro-Trading
PC3000 Complete Installation guide iss 12 - Elektro-Trading
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
There are no hardware configuration options on port D.<br />
Port D Connections<br />
Pin Number RS232 (Standard)<br />
1 Rx1 2 Tx<br />
3 Rx<br />
4 RTS<br />
5 CTS<br />
6 nc<br />
7 Common<br />
8 Common<br />
9 Cable Screen<br />
10 Cable Screen<br />
11 Cable Screen<br />
<strong>12</strong> Cable Screen<br />
<strong>PC3000</strong> - <strong>Installation</strong> Guide <strong>iss</strong>. 3.2<br />
Intelligent Communications Module<br />
Note:<br />
1 RS232 on Port D the Rx connection is doubled up to terminals 1 and 3 to<br />
provide compatibility with the LCM-Plus V3, ports A & B, where Rx is on<br />
terminal 1. (Tx for ICM port D and LCM-Plus ports A & B are all on Pin 2. The<br />
LCM-Plus does not provide RTS and CTS).<br />
CONFIGURATION OPTIONS<br />
Setting the base address (Group Identifier)<br />
A rotary switch accessible through the side cover of the module should be set by<br />
screwdriver. It may be set in the range 0-9. Refer to '<strong>PC3000</strong> Function Block<br />
Manual' (HA022917), section 'Communications' for further details.<br />
Position of address switch - underside of module.<br />
Front<br />
PCB Switch<br />
Back<br />
18-3
Change language