PC3000 Complete Installation guide iss 12 - Elektro-Trading
PC3000 Complete Installation guide iss 12 - Elektro-Trading
PC3000 Complete Installation guide iss 12 - Elektro-Trading
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIAGNOSTICS<br />
<strong>PC3000</strong> - <strong>Installation</strong> Guide<br />
Profibus Master Fieldbus Card<br />
There are four LEDs on the front of the module to provide information about the<br />
module operations. These are as follows. In normal operation, R, 1 and 0 will be<br />
steady and F will be off.<br />
Label Colour Function<br />
F Red Error<br />
R Green Run<br />
1 Green Ready<br />
0 Green Status<br />
Table 5 Diagnostic indication<br />
Hardware requirement<br />
The software support for the Profibus module requires the installation of a <strong>12</strong>8K<br />
RAM card in the second RAM slot of the LCM-PLUS. This is the rearmost position<br />
behind the EPROM card.<br />
IMPORTANT<br />
The downloadable function blocks require a <strong>12</strong>8K<br />
RAM card installed in the LCM-PLUS.<br />
Software requirement<br />
The <strong>PC3000</strong> function blocks that support this module for the DOS PS tool come in<br />
the form of a downloadable function block library on a single 31/2" diskette. The<br />
files supplied on the diskette must be copied to the relevant directories on the<br />
computer running the DOS version of <strong>PC3000</strong> programming software. The Windows<br />
version of the tool WinPS already has the necessary FIELDBUS library to support<br />
this module.<br />
19-5
Change language