PC3000 Complete Installation guide iss 12 - Elektro-Trading

I/O Module Types
8-2
If full anti-static precautions cannot be observed, personal grounding may be
achieved by touching an earthed metal chassis or component prior to handling the
module.
(1) Remove the connector/fascia assembly by pulling it squarely off the module.
(2) Turn the module over such that the thinner, bottom cover faces upward.
(3) Lift the cover clear of the retaining plastic pegs adjacent to the backplane
connector.
(4) Unhook the cover from its’ top fixing.
Top
Pin
Fixing
Backplane
Connector
Pin
(5) Remove the top cover.
PRODUCTCODE
SERIAL NUMBER
Faraday Close, Durrington, Worthing
West Sussex BN13 3PL
Tel (01903) 268500
Bottom cover
Pin
Backplane
Connector
PC3000 Installation Guide