PC3000 Complete Installation guide iss 12 - Elektro-Trading

More documents

Recommendations

Info

PC3000/CABLE/25PIN/261/3.0M PC3000 Installation Guide Cabling and Devices Usage: To extend separation between 261 converter and the PC3000. Cable assembly fitted with two male 25 pin D connectors. Pin numbering, function and wire colours are as follows. 261 Function 25 way D Function Wire Colour 16 Tx- 16 Tx- Red 3 Tx+ 3 Tx+ Black 13 Rx- 13 Rx- Green 12 Rx+ 12 Rx+ Blue 7 Common 7 Common Screen Grey/White Brown/Orange Not used 22-7
Cabling and Devices Cables for use with operator panels EuroPanel 2L x 40C PC3000/CABLE/COMM/EP2X40/3.0M 22-8 Usage: Used to connect PC3000 RS-422 port (Local Controller Module A, B or C and Intelligent Communications Module A, B and C only) to the two line by 40 character Euro Panel display. The cable includes a spur for connection to a dc power supply for powering the panel. Pin numbering, function and wire colours are as follows. LCM/ICM Port Function Panel Function Wire Colour Pin 25 way 1 nc nc Brown 2 nc nc Orange 3 Tx- 2 Rx- Red 4 Tx+ 3 Rx+ Black 5 Rx- 4 Tx- Green 6 Rx+ 5 Tx+ Blue 7 Common 1 Common Grey 8 Common 1 Common White Note 2 Screen Note 1 18 24v Red 25 0v Black Notes: (1) The screen is connected to the metal band around the outside of the 8 pin plug. There is no connection on the 25 way connector. (2) The screen is connected directly to the Rack as a Safety and RFI Ground, via the module's front earth clip, in Version 3 ICMs and LCM-Plus. (3) Observe 24v dc power supply connections. PC3000 Installation Guide
Page 1 and 2:
PC3000 ENG Installation guide
Page 3 and 4:
PC3000 - Installation Guide PREFACE
Page 5 and 6:
Installation Safety Requirements Fo
Page 7 and 8:
Safety iv PC3000 - Installation Gui
Page 9 and 10:
BEFORE YOU BEGIN Before installing
Page 11 and 12:
ASSEMBLING THE PC3000 PC3000 Instal
Page 13 and 14:
Analogue Input PC3000 Installation
Page 15 and 16:
Chapter 2 THE PC3000 SYSTEM Content
Page 17 and 18:
The PC3000 System System components
Page 19 and 20:
The PC3000 System 2-4 PC3000 Instal
Page 21 and 22:
RACK INSTALLATION PC3000 - Installa
Page 23 and 24:
Rear/bulkhead mounting The rear/bul
Page 25 and 26:
EUROTHERM CONTROLS DIN Rail Convert
Page 27 and 28:
PC3000 - Installation Guide The Rac
Page 29 and 30:
PC3000 - Installation Guide The Rac
Page 31 and 32:
PC3000 Installation Guide Chapter 4
Page 33 and 34:
The Power Supply Module identificat
Page 35 and 36:
The Power Supply CONFIGURATION OPTI
Page 37 and 38:
The Power Supply 4-6 Link 2 selects
Page 39 and 40:
Chapter 5 LOCAL CONTROLLER MODULE C
Page 41 and 42:
Local Controller Module 5-2 office
Page 43 and 44:
Local Controller Module Setting the
Page 45 and 46:
Local Controller Module 5-6 Multi-d
Page 47 and 48:
Local Controller Module 5-8 It is r
Page 49 and 50:
Local Controller Module 5-10 Note:
Page 51 and 52:
Local Controller Module 5-12 detail
Page 53 and 54:
Local Controller Module Procedure i
Page 55 and 56:
Description PC3000 - Installation G
Page 57 and 58:
Location PC3000 - Installation Guid
Page 59 and 60:
Types of communication PC3000 - Ins
Page 61 and 62:
PC3000 - Installation Guide Local C
Page 63 and 64:
Communication configuration links P
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
The options are summarised below: P
Page 73 and 74:
Page 75 and 76:
Chapter 7 RACK INTERFACE MODULE Con
Page 77 and 78:
Rack Interface Module Connections L
Page 79 and 80:
Rack Interface Module Removing the
Page 81 and 82:
Chapter 8 I/O MODULES Contents Gene
Page 83 and 84:
I/O Module Types 8-2 If full anti-s
Page 85 and 86:
Version compatibility PC3000 - Inst
Page 87 and 88:
Connections PC3000 - Installation G
Page 89 and 90:
Process level voltage inputs PC3000
Page 91 and 92:
Use of screened cables on thermocou
Page 93 and 94:
Location Module Type: PC3000/AI/VER
Page 95 and 96:
General PC3000 Installation 4 Chann
Page 97 and 98:
Step-by-step calibration guide PC30
Page 99 and 100:
Calibration of the cold junction se
Page 101 and 102:
PC3000 Installation 4 Channel Analo
Page 103 and 104:
PC3000 Installation 4 Channel Analo
Page 105 and 106:
PC3000 Installation 5 5 5 5 5 4 6 4
Page 107 and 108:
Chapter 10 4 CHANNEL ANALOGUE OUTPU
Page 109 and 110:
4 Channel Analogue Output Module Mo
Page 111 and 112:
4 Channel Analogue Output Module DI
Page 113 and 114:
4 Channel Analogue Output Module 10
Page 115 and 116:
4 Channel Analogue Output Module 10
Page 117 and 118:
Chapter 11 DIGITAL INPUT (LOW DC) M
Page 119 and 120:
Digital Input (Low DC) Module Conne
Page 121 and 122:
Digital Input (Low DC) Module 11-4
Page 123 and 124:
Page 125 and 126:
Status indication PC3000 - Installa
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136: Version compatibility PC3000 - Inst
Page 137 and 138: Encoder supply PC3000 - Installatio
Page 139 and 140: User programming hints PC3000 - Ins
Page 143 and 144: Status indication PC3000 - Installa
Page 145 and 146: Fusing PC3000 - Installation Guide
Page 149 and 150: Status indication PC3000 - Installa
Page 153 and 154: There are no hardware configuration
Page 155 and 156: PC3000 - Installation Guide iss. 3.
Page 157 and 158: Notes: PC3000 - Installation Guide
Page 159 and 160: Cables PC3000 - Installation Guide
Page 163 and 164: Configuration options PC3000 - Inst
Page 165 and 166: DIAGNOSTICS PC3000 - Installation G
Page 167 and 168: PC3000 Installation Guide Chapter 2
Page 169 and 170: DeviceNet Slave Fieldbus Card Modul
Page 171 and 172: DeviceNet Slave Fieldbus Card Conne
Page 173 and 174: DeviceNet Slave Fieldbus Card 20-6
Page 175 and 176: EUROPANEL 2L X 40C Description PC30
Page 177 and 178: Connections PC3000 Installation Gui
Page 179 and 180: PC3000 Installation Guide Chapter 2
Page 181 and 182: Cabling and Devices 22-2 Notes: (1)
Page 183 and 184: Cabling and Devices Cables for use
Page 185: Cabling and Devices 22-6 PC3000/CAB
Page 189 and 190: Cabling and Devices Other cables 22
Page 191 and 192: Cabling and Devices Recommendations
Page 193 and 194: Cabling and Devices Use of 261 Seri
Page 195 and 196: Cabling and Devices Multi-drop cabl
Page 197 and 198: Cabling and Devices 22-18 PC3000 In
Page 199 and 200: Appendix A Enclosure of live parts
Page 201 and 202: Appendix A Supply isolators Every e
Page 203 and 204: Appendix A App. A-6 PC3000 Installa
show all

PC3000 Complete Installation guide iss 12 - Elektro-Trading

Create successful ePaper yourself

Delete template?

Save as template?