PC3000 Complete Installation guide iss 12 - Elektro-Trading

Description
PC3000 - Installation Guide
Local Controller Plus Module
The Local Controller Plus Module is an enhanced version of the standard Local
Controller Module (LCM). It is the central processor of the system and only resides
in a slot within the master rack of a system. Subsequent slave racks use a Rack
Interface Module (RIM) in place of the LCM and these occupy the LCM slot in these
racks.
The LCM-Plus or RIM's occupy the slot immediately to the right of the PSU.
The LCM-Plus provides 2 x RS232/422/485 + 1 x RS422/485 for communications
with operator panels etc. The lower socket is provided for communication with
extension racks ONLY.
Ports A, B and C may be used in point-to-point or multidrop applications where
multiple LCM's may be slave to a single master e.g. a supervisory computer.
Cleaning
Isopropyl alcohol may be used to clean the labels, do not use water or water based
products or they will become illegible.
A mild soap solution may be used to clean the exterior surfaces or this product.
Module identification
A
B
C
Ext.
Rack
PRODUCT CODE:
PRODUCT CODE:
SERIAL NUMBER:
SERIAL NUMBER:
Eurotherm Limited
Faraday Faraday Close, Durrington, Close Worthing
West Sussex Durrington, BN13 3PL Worthing
West Sussex BN13 3PL
Tel: (01903) England 268500
Fax: (01903) 265982
EUROTHERM
A label on the side of the module carries a serial number and product code in the
form:
PC3000/LCMPLUS/VERSION3/slot1/slot2
Slot 1 - expansion memory for applications
Slot 2 - further expansion and memory for downloadable function blocks
Valid configurations are:
slot1 - NOMEM, 128KRAM, 512KRAM, user Eprom
slot2 - NOMEM, 128KRAM, 512KRAM
Examples are shown on the following page.
6-1