PC3000 Complete Installation guide iss 12 - Elektro-Trading

Status indication
PC3000 - Installation Guide
Logic Output Module
Output, 'health' and communications status indication are provided by means of
indicators visible through the detachable connector/fascia assembly. The following
assignment applies:
Version 3 has introduced a change in the numbering of the Status Indication LED's
Indicator Number Function Colour
Version 2 Version 3
1 F Fault Red
2 C Comms Green
3 R Run Green
4 n/a
5 1 Logic 1 Yellow
6 2 Logic 2 Yellow
7 3 Logic 3 Yellow
8 4 Logic 4 Yellow
9 5 Logic 5 Yellow
10 6 Logic 6 Yellow
11 7 Logic 7 Yellow
12 8 Logic 8 Yellow
13 9 Logic 9 Yellow
14 10 Logic 10 Yellow
15 11 Logic 11 Yellow
16 12 Logic 12 Yellow
VERSION 2 VERSION 3
1 2 3 4 F C R
5 6 7 8 1 2 3 4
9 10 11 12 5 6 7 8
13 14 15 16 9 10 11 12
Note:
The Logic Output module will indicate a fault under the following conditions:
1. When the PC3000 is in the reset mode i.e. program not running. It will clear
when the PC3000 is placed in the run state.
2. If the module is placed in a slot which is not referenced by the PC3000 program.
3. A hardware fault.
17-3