Applied Biosystems SOLiD™ 4 System SETS Software User Guide ...

Troubleshooting analysis failure
Applied Biosystems SOLiD 4 System SETS Software User Guide
Appendix D Advanced Topic: Primary Analysis
Procedures to verify primary analysis status D
If there is a red dot before the analysis job name, the analysis job
failed. To see details:
1. Click the name of the failed analysis job. The following
example shows 2 failed analysis jobs: F3_PC_01_V1 and
F3_PB_10_V1. The right portion of the figure shows the details
of analysis F3_PC_01_V1.
2. Check Filter_FastaF3 and Filter_FastaR3 (if paired-end library)
to see if the analysis job was successful. Check the details for
the analysis job and each cycle to ensure that they are correct.
See this example:
187