Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Understanding display messages<br />
Message Meaning Suggested solutions<br />
Message Meaning Suggested solutions<br />
Install toner cartridge<br />
Input System Failure<br />
[error number]:Check<br />
[HCF number]<br />
connection<br />
Input System Failure<br />
[error number]:Check<br />
[tray number]<br />
connection<br />
Input System Failure<br />
[error number]:Pull [HCF<br />
number] out and insert it<br />
The toner cartridge is<br />
not installed or the<br />
toner cartridge is not<br />
properly installed.<br />
There is a problem in<br />
the HCF<br />
There is a problem in<br />
the tray<br />
There is a problem in<br />
the HCF.<br />
Install the toner cartridge.<br />
If it is already installed, try<br />
to reinstall the toner<br />
cartridge. If the problem<br />
persists, call for service.<br />
Open and close the HCF. If<br />
the problem persists, call<br />
for service.<br />
Open and close the tray. If<br />
the problem persists, call<br />
for service.<br />
Open and close the HCF. If<br />
the problem persists, call<br />
for service.<br />
LSU Failure: [error<br />
number]. Turn off then<br />
on. Call for service if the<br />
problem persists<br />
Motor Failure: [error<br />
number]. Turn off then<br />
on. Call for service if the<br />
problem persists<br />
MSOK Failure [error<br />
number]. Call for service<br />
and Change MSOK<br />
MSOK Failure [error<br />
number]. Call for service<br />
There is a problem in<br />
the LSU.<br />
There is a problem in<br />
the motor system.<br />
There is a problem in<br />
the engine system.<br />
There is a problem in<br />
the engine system.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Input System Failure<br />
[error number]:Pull [tray<br />
number] out and insert it<br />
There is a problem in<br />
the tray.<br />
Open and close the tray. If<br />
the problem persists, call<br />
for service.<br />
Network cable is<br />
disconnected. Check it<br />
The machine is not<br />
connected with a<br />
network cable.<br />
Connect the machine to<br />
the network with a<br />
network cable.<br />
Lamp Failure: [error<br />
number]. Open the door,<br />
then close it. Call for<br />
service if the problem<br />
persists<br />
There is a problem in<br />
the lamp.<br />
Open the door, then close<br />
it. If the problem persists,<br />
call for service.<br />
Original paper jam in the<br />
exit area of scanner<br />
The originals are<br />
jammed in Dual scan<br />
document feeder.<br />
Clear the jam.<br />
10. Troubleshooting<br />
252