17.11.2015 Views

Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH

Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH

Samsung Multifunzione a colori MultiXpress X7600GX (A3) (60ppm) - User Manual_36.16 MB, pdf, ENGLISH

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Network settings (configuring TCP/IP)<br />

DNS Configuration<br />

You can configure the DNS server.<br />

• Host Name: Enter the host name. You can enter up to 63 characters. Default<br />

name is “SEC[MAC address]”.<br />

• Domain Name: Enter the domain name. You can enter up to 128 characters.<br />

3<br />

TCP/IPv6<br />

You can set the IPv6 settings.<br />

Tap Settings > Network Settings > Ethernet > TCP/IPv6 from the home<br />

screen or Apps.<br />

• Primary DNS Server: Enter the address of the DNS server you want to use<br />

primarily.<br />

• Secondary DNS Server: Enter the address of the DNS server you want to<br />

use as an alternative.<br />

• Dynamic DNS Registration: If you want to use, check the checkbox(es) of<br />

dynamic DNS registration. If this option is checked, the machine registers its<br />

host name and domain name to configured DNS servers dynamically. Also,<br />

if this option is checked and DHCP is selected, DHCP FQDN options are<br />

automatically disabled.<br />

WINS (Windows Internet Name Service)<br />

You can configure the WINS server. WINS is used in the Windows operating<br />

system. Select this option.<br />

You can also use this feature from the SyncThru Web Service. Open the<br />

Web browser from your networked computer and type the IP address of<br />

your machine (see "Settings tab" on page 185).<br />

• Protocol: Tap to use IPv6 protocol in the system. Reboot the machine to<br />

apply the change.<br />

• IPv6 Address: Shows the IPv6 address types.<br />

- Link-local Address: This is an IPv6 address starting with a prefix value<br />

FE80. This address has local link scope and is automatically generated.<br />

- Stateless Address: This is an IPv6 address which is formed by router<br />

advertised prefix and interface identifier. On a interface like Ethernet,<br />

interface identifier is usually derived from the Mac address of the<br />

machine. The advertised prefix depends on the router configurations.<br />

Display IP address<br />

More than one address may be configured for the router advertisement, but<br />

only one will be displayed in the display screen.<br />

You can set the machine to display the IP address on the Notification Bar. If you<br />

select this option the IP address will show on the Notification Bar.<br />

3. Network Setup<br />

339

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!