Materialforschung mit Positronen: Von der Doppler-Spektroskopie zur
Materialforschung mit Positronen: Von der Doppler-Spektroskopie zur
Materialforschung mit Positronen: Von der Doppler-Spektroskopie zur
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
[360] P. Haasen, Physikalische Materialkunde, Springer, Berlin (1974)<br />
[361] D. Broek, Elememtary engineering fracture mechanics, Kluwer Academic Publischers,<br />
Boston 1982<br />
[362] A.A. Griffith, The phenomena of rupture and flow in solids, Phil. Trans. Roy. Soc.<br />
London A 221 (1921) 163<br />
[363] S. Antolovich, An Introduction to Fracture Mechanics, in: J. Barsom et al. (eds.), Fatigue<br />
and Fracture, ASM Handbook Vol. 19, ASM International, Materials Park, OH,<br />
USA (1997) pp. 371<br />
[364] M. Haaks, K. Bennewitz, H. Bihr, U. Männig, C. Zamponi, K. Maier, Measurements on<br />
Cracktips in Stainless Steel AISI 321 by using a New Positron Microprobe, Appl. Surf.<br />
Sci. 149 (1999) 207<br />
[365] W. Egger, G. Kögel, P. Sperr, W. Triftshäuser, S. Rödling, J. Bär, H.J. Gudladt, Vacancy<br />
clusters close to a fatigue crack observed with the München scanning positron<br />
microscope, Apll. Surf. Sci. 194 (2002) 214<br />
[366] C. Salomon, Critical Machining Velocities, German Patent No. 523594 (1931)<br />
[367] D.G. Flom, R. Komanduri, M. Lee, High-Speed Machining of Metals, Annu. Rev. Mater.<br />
Sci. 14 (1984) 231<br />
[368] H. Schulz, Hochgeschwindigkeitsbearbeitung, C. Hanser Verlag (1996)<br />
[369] H. Tönshoff, R. Ben Amor, R. Clos, P. Veit, Predicting the HSC-Range on the Basis of<br />
the Material Properties, Proc. of the Conf. of High Speed Machining, Chicago (2001)<br />
[370] J. Plöger, Randzonenbeeinflussung durch Hochgeschwindigkeitsdrehen, Dissertation,<br />
Universität Hannover (2002)<br />
[371] A. Behrens, B. Westhoff, K. Kalisch, Application of the Finite Element Method at the<br />
Chip Forming Process un<strong>der</strong> High Speed Cutting, in: H.K. Tönshoff, C. Hollmann<br />
(eds.), Hochgeschwindigkeitsspanen, Wiley-VCH, Weinheim (2005), pp. 112<br />
[372] K.M. Vernaza-Peña, J.J. Mason, M. Li, Experimental study of the temperature field<br />
generated during orthogonal machining of an aluminum alloy, Exp. Mech. 42 (2002)<br />
221<br />
[373] R. Ben Amor, Thermomechanische Wirkmechanismen und Spanbildung bei <strong>der</strong> Hochgeschwindigkeitszerspanung,<br />
Dissertation, Universität Hannover (2003)<br />
[374] T. Adler, C.R. Houska, Simplifications in the X-ray line-shape analysis, J. Appl. Phys.<br />
50 (1979) 3282<br />
[375] D.R. Black, C.J. Bechtoldt, R.C. Placious, M. Kuriyama, Three Dimensional Strain<br />
Measurements with X-Ray Energy Dispersive Spectroscopy, J. Nondestruct. Eval. 5<br />
(1985) 21<br />
[376] D.R. Black, C.J. Bechtoldt, R.C. Placious, M. Kuriyama, Three Dimensional Strain<br />
Measurements with X-Ray Energy Dispersive Spectroscopy, J. Nondestruct. Eval. 5<br />
(1985) 21<br />
[377] H.F. Poulsen, S. Garbe, T. Lorentzen, D. Juul Jensen, F.W. Poulsen, N.H. An<strong>der</strong>sen, T.<br />
Frello, R. Feidenhans'l, H. Graafsma, Applications of High-Energy Synchrotron Radia-<br />
165