OP-755 Part 2 Pages 197-401 - Personal Page of GENE SLOVER
OP-755 Part 2 Pages 197-401 - Personal Page of GENE SLOVER
OP-755 Part 2 Pages 197-401 - Personal Page of GENE SLOVER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
358<br />
adjustable coupling irnrnediately above the pan floor on the<br />
clutch shifting shaft.<br />
MAINTENANCE INSTRUCTIONS<br />
58. Genera Z. - Mechanisms <strong>of</strong> the class <strong>of</strong> the sight assemblies,<br />
comprising principally an elaborate system <strong>of</strong> mechanical<br />
signal transmission, require high mechanical accuracy<br />
and must have exacting care. Accurate transmission <strong>of</strong> input<br />
movements has been attained by design arrangements and exceedingly<br />
high standards <strong>of</strong> manufacture. If the units are maintained<br />
in alignment, are periodically checked for accuracy and<br />
are lubricated and ot'herwise serviced as prescribed, they will<br />
retain their design features.<br />
59. Lubri c at i on, - All points <strong>of</strong> shaft support, all gear<br />
brackets, gearing and all moving elements <strong>of</strong> signal.transmission<br />
and telescope mounting have been provided with means for lubrication.<br />
In many instances correct lubrication will only be<br />
obtained provided the lubricants prescribed on the· charts are<br />
used. This is particularly important with respecrt to the in-<br />
·ternal mechanisms <strong>of</strong> the housings at t.r-a.LnerI s sand pointer I s<br />
stations, - oil is required at certain fittings, grease must<br />
not be substituted. Lubricants should be applied sparingly<br />
but regularly.<br />
60. Disassemb.Zy and- assembly. - Disassembly and reassemb.Ly<strong>of</strong>all<br />
units <strong>of</strong> the sight, optical instruments, attached<br />
indica tors and transmitters excepted, are, appar-ent. from the<br />
drawings. All such work should be performed by experienced<br />
personnel only, with' the special tools provided and only after<br />
mating parts are marked at. couplings, gears, etc., to provide<br />
for correct reassembly.<br />
Equipment attached to the sight assemblies may be<br />
dismantled only by authorized personnel familiar with such<br />
optical and fire control instruments.