The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
10. If the port number specified for the eG manager is already being used by another application,
then the following error message will appear:
Figure 3.10: A message box stating that the specified port is in use
Click on the OK button in the message box to close it, and proceed to provide a different port
number for the manager.
11. The eG Enterprise system provides users with the option to view and key in data in a language of
their choice. Different users connecting to the same manager can view data in different
languages. However, some languages such as Chinese, Japanese, and Korean, support a doublebyte
character set. To view data in the eG user interface in Chinese, Korean, or Japanese, the eG
manager should be explicitly configured to display and process double-byte characters. In such a
case, enable double-byte support for the eG manager by clicking the Yes button in Figure 3.11.
On the other hand, for handling the character sets of other languages (example: French, German,
Spanish, Portugese, etc.), the eG manager need not be double-byte enabled. At such times, click
the No button to disable double-byte support for the eG manager.
Note:
Figure 3.11: Enabling double-byte support
For a detailed discussion on how to enable double-byte support for eG Enterprise, refer to
Chapter 4 of this manual.
12. Next, you will be prompted to indicate whether you want to SSL-enable the eG manager or not.
Click Yes in Figure 3.12 to SSL-enable the eG manager or No to not SSL-enable the same.
164