The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
passed to the eGurkhaAgent service. The process to be followed for performing this, has
already been discussed in Section 3.8.5.
MAPI should be configured in the Exchange 2000 server.
MAPI is used by an Exchange server (5.5/2000/2003) for internal messaging purposes. The
XChgMailTest and the MsXMailTest require MAPI to be up and running in the Exchange server.
While this service is configured in an Exchange server 5.5 by default, it is not the case in an
Exchange 2000 server. To configure this service, do the following:
a. Open the Active Directory Users and Computers window using the menu sequence: Start ->
Programs -> Microsoft Exchange -> Active Directory Users and Computers.
b. In the tree-structure in the left pane, expand the node representing the site on which a
mail box for the eG user has been configured. Click on the Users folder within the site, so
that the complete list of mailboxes appears in the right pane. Now, double-click on the eG
user’s mailbox. Then, click on the E-mail Addresses tab (see Figure 3.135) of the Properties
dialog box that appears:
Figure 3.332: The E-mail Addresses tab
c. To add the MAPI email-address to the list of addresses displayed therein, click on the New
button in Figure 3.332. Upon clicking, an E-mail address type list will appear (see Figure
3.136). Select Microsoft Mail Address from that list and click the OK button (see Figure
3.136).
391