The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
12. Next, select the type of network being defined. If the eG agents to be protected by the ISA proxy
server are client computers belonging to the same network, select the Internal Network from Figure
3.246. Click the Next > button to move on.
Figure 3.246: The newly created destination set being displayed
13. To specify the IP addresses that form part of the network being defined, click on the Add button in
Figure 3.247 that appears.
Figure 3.247: Adding the IP addresses of the network
14. Provide the IP address range to which the rule applies in the Starting address and Ending address text
boxes of Figure 3.248, and then click the OK button therein. In our case, the range of IPs
representing the eG agent hosts will have to be provided here.
332