The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
addresses of the agents in your internal network, which need to communicate with the manager
outside the network. Finally, click on the OK button to register the specifications. If the agent IPs
do no fall within a specific IP range, then add each of the IPs as a separate client set. For
example, if manager-communication is to be enabled for the agents 10.0.0.10 and 10.0.0.95,
then add 10.0.0.10 as a separate client set by specifying the same IP against the From and To
fields. Similarly, add 10.0.0.95 as a separate client set.
Figure 3.205: Adding an IP range
5. Clicking on the OK button in Figure 3.205 will lead you back to Figure 3.204, but this time the
Include these IP addresses section therein will list the newly created IP range (see Figure 3.206).
Figure 3.206: The details of the new client set being displayed
6. Upon clicking on the OK button in Figure 3.206, you will return to Figure 3.203. The Current client
computer sets section in this page will now display the name of the newly created client set (see
Figure 3.207).
311