06.05.2013 Views

The eG Installation Guide - eG Innovations

The eG Installation Guide - eG Innovations

The eG Installation Guide - eG Innovations

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Configuring the <strong>eG</strong> Manager to Send SMS Alerts<br />

7.1 Integrating the <strong>eG</strong> Manager with NowSMS Lite<br />

<strong>The</strong> NowSMS Lite is a software gateway that allows sending of SMS messages using a GSM<br />

(GRPS/EDGE/3G) modem. It allows clients to submit SMS messages for delivery via the GSM modem,<br />

using HTTP interface that supports HTTP GET method.<br />

You can integrate the <strong>eG</strong> manager with NowSMS Lite so that:<br />

the alerts generated by the <strong>eG</strong> manager are automatically converted into SMS format and<br />

forwarded to the NowSMS server through a HTTP interface;<br />

the SMS alerts received by the NowSMS server are then delivered to configured mobile<br />

phones using a GSM modem connected via serial port or USB.<br />

Figure 7.1: How the <strong>eG</strong> manager - NowSMS Lite integration works<br />

7.1.1 Pre-requisites for Integrating <strong>eG</strong> Manager with NowSMS Lite<br />

<strong>The</strong> following pre-requisites should be fulfilled before attempting to integrate the <strong>eG</strong> manager with<br />

NowSMS Lite:<br />

Make sure that a licensed NowSMS Lite software, purchased from NowMobile.com Limited, is<br />

installed and fully operational in the target environment;<br />

<strong>The</strong> server/desktop hosting NowSMS Lite should fulfill the following requirements:<br />

o Should support a USB device driver for the GSM modem (if the modem<br />

is USB based). <strong>The</strong> driver must be explicitly obtained from the modem<br />

vendor and installed.<br />

o Should support a serial port device driver (if the modem is serial port<br />

based). This driver will be typically installed and available in Windows<br />

OS by default.<br />

<strong>The</strong> environment should comprise of a GSM Modem that supports an “extended AT command<br />

set” for sending/receiving SMS messages, as defined in the ETSI GSM 07.05 and and 3GPP TS<br />

27.005 specifications; the recommended GSM modems for this integration are:<br />

o Wavecom Fastrack M1306B<br />

428

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!