The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
5. Figure 3.238 will then appear allowing you to configure a new access rule. Begin by specifying an
Access rule name (see Figure 3.238). Then, click on the Next > button.
Figure 3.238: Providing a name for the access rule
6. Next, indicate the action to be taken when the rule conditions are met. To deny access, select
Deny and to permit access, choose Allow (see Figure 3.239). Since we need to allow the eG agent
to communicate with the eG manager, choose Allow.
Figure 3.239: Selecting Allow or Deny
7. From Figure 3.240 that appears, select the protocols to which this rule applies. As the proxy
server needs to support only the HTTP and HTTPS communication between the manager and the
agent, choose the Selected Protocols option from Figure 3.240, and click the Add button therein.
328