The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
Ensure that the
name/IP of the
manager
appears against
“Owner: CN=…”
c. This command, upon execution, will request for the keystore password. The default keystore
password provided by Java is changeit. Provide this password and click Enter.
d. Finally, the command will request your confirmation to make the imported certificate a trusted
one. Enter yes to trust the certificate.
e. If the processing was successful, then a message stating that the “Certificate was added to
keystore” will appear. Figure 3.133 depicts the processing explained above.
Figure 3.133: The process of importing and trusting the manager certificate
f. Now, start the agent using the instructions provided in the Section 3.8.
7. If you select the No button in Figure 3.130, then setup will attempt to configure the agent’s
operational environment with the details of the eG manager that the agent should communicate
with. For this purpose, the setup process prompts the user for the hostname (or IP address) and
the port number of the eG manager (see Figure 3.134). However, 7077 is the default port. The
hostname should be used if DNS is enabled in the target environment. Otherwise, the IP address
should be used.
256