The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
3.23.3 Configuring a Sybase Adaptive Server
To configure a Sybase Adaptive server, eG provides a special Sybase configuration tool. To execute
the tool, follow the menu sequence depicted by Figure 3.313.
Figure 3.313: Executing the Sybase configuration tool
1. Upon execution, the command will request for the following inputs:
The IP address of the host on which the Sybase server has been installed
The port at which the Sybase server listens
The Password of the Sybase administrative user (who holds the “sa_role” privilege).
Please enter the details of the Sybase Adaptive server which is running on this
machine.
IP address : 192.168.10.88
Port number : 4100
Password for sa login :
2. By default, the eG Sybase Monitor extracts the measures of interest by executing stored
procedures on the 'master' database on the Sybase server. If, for some reason, you decide not to
use the 'master' database, then you can create a special database for this purpose using this
setup procedure. To achieve this, first, type y when setup prompts you for your confirmation to
create a new database.
Do you want me to create a new database to store eG System Procedures and Tables?
[y/n]: y
373