The eG Installation Guide - eG Innovations

Installing and Configuring on Windows Environments
Figure 3.333: Selecting Microsoft Mail Address as the address type
d. In Figure 3.334 that appears next, specify the properties of the chosen address type.
Enter the name of the organizational unit (see Figure 3.328) that houses the mailbox, in
the Network name text box. Then, in the Postoffice name text box, specify the name of the
site (see Figure 3.327) on which the mailbox has been configured. Finally, the Mailbox name
(see Figure 3.328) is to be specified.
Figure 3.334: Specifying the properties of the address type
e. Next, click on the Apply button, and then the OK button to return to Figure 3.334. Finally,
click on the Apply and OK buttons in Figure 3.332 to complete the process of creating the
MAPI service.
3.23.7 Configuring the Lotus Domino Mail Server
The DominoNrpcTest executed by an eG external agent simulates clients sending and receiving mails
via a Lotus Domino mail server, using the NRPC protocol.
The two main parameters of this test are:
The user name of a mailbox on the Domino server that the test uses to send and receive mails
The password for the user mailbox
The following are the pre-requisites for the functioning of this test:
The eG external agent that is executing the DominoNrpcTest, should be installed on a
Windows 2000/2003 server/client in the same domain as the Lotus Domino mail server.
392