The eG Installation Guide - eG Innovations

Installing and Configuring on Unix
d. Finally, the command will request your confirmation to make the imported certificate a
trusted one. Enter yes to trust the certificate.
e. If the processing was successful, then a message stating that the “Certificate was added
to keystore” will appear. Finally, start the agent.
Note:
Note:
Ensure that the manager IP/hostname provided when setting up the agent matches the
IP/hostname provided when generating the certificate on the manager.
While configuring an eG agent on AIX, setup will not prompt you to confirm whether you want
the eG agent to allow trusted certificates alone.
6. The setup will now request you to indicate whether you wish to assign nick name(s) for the eG
agent’s host. Instead of remembering the IP address/ host name of a host, users can assign one
or more nick names to the host and manage all applications on the host using the same.
Please indicate if you want to assign a nick name(s) for this host? y/n [n] :
To assign nick names, press y. Setup will then request you to specify the nick name(s) to be
assigned to the host.
Please enter the nick name(s) to be used for this host:
While providing multiple nick names, ensure that they are separated by a ‘:’. Also, ensure that a
nick name does not contain any white spaces, and that all nick names are in lower case.
7. The next step involves configuration of any Coldfusion application servers for monitoring by the eG
agent.
Do you want to configure any Coldfusion servers running on for
monitoring by the eG Agent? y/n [y]
The steps involved in this process are enumerated in Section 2.15.1.
8. Next, the setup will request your confirmation to configure any Sybase Adaptive servers for
monitoring by the eG agent.
Do you want to configure any Sybase Adaptive servers running on for
monitoring by the eG Agent? y/n [y]
The steps involved in this process are enumerated in Section 2.17.3.
9. If you are configuring an agent on a Solaris host, then you would be prompted to configure the
web server executing on the host. Enter y to invoke the setup_webadapter script; this script enables
you to configure a web adapter on the Solaris host for monitoring the transactions to the web
server on it. If you do not want to monitor a web server, then enter n here.
Do you want to configure any web servers running on sun08 for monitoring by the eG
Agent? y/n [n] :
65