TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
General Commands
enable
3-12
Command Function Mode Page
enable Activates privileged mode NE 3-12
disable Returns to normal mode from privileged mode PE 3-13
configure Activates global configuration mode PE 3-14
reload Restarts the system PE 3-16
end Returns to Privileged Exec mode GC, IC,
LC, VC
3-16
exit Returns to the previous configuration mode, or
exits the CLI
any 3-17
quit Exits a CLI session NE, PE 3-17
help Shows how to use help any NA
? Shows options for command completion
(context sensitive)
any NA
Use this command to activate Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See “Understanding Command Modes” on page
3-6.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec