TigerSwitch 10/100/1000 - SMC

Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
PRIORITY COMMANDS
CoS assigned at the ingress port is used to select a CoS priority at the
egress port.
Example
The following example shows how to map CoS values 0, 1 and 2 to CoS
priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to CoS
priority queue 2, and values 6 and 7 to CoS priority queue 3:
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0 1 2
Console(config-if)#queue cos-map 1 3
Console(config-if)#queue cos-map 2 4 5
Console(config-if)#queue cos-map 3 6 7
Console(config-if)#
Related Commands
show queue cos-map
show queue bandwidth
Use this command to display the Weighted Round-Robin (WRR)
bandwidth allocation for the four class of service (CoS) priority queues.
Default Setting
None
Command Mode
Privileged Exec
3-125