TigerSwitch 10/100/1000 - SMC

CLASS OF SERVICE CONFIGURATION
Web – Click Priority/IP Precedence Priority. Select an IP Precedence value
from the IP Precedence Priority Table by clicking on it with your cursor,
enter a value in the Class of Service Value field, and then click “Apply.” Be
sure to also select “IP Precedence” from the IP Precedence/DSCP
Priority Status menu.
CLI – The following example globally enables IP Precedence service on
the switch, maps IP Precedence value 1 to CoS value 0 on port 5, and then
displays all the IP Precedence settings for that port. (Note that the setting
is global and applies to all ports on the switch.)
Console(config)#map ip precedence 3-127
Console(config)#interface ethernet 1/5 3-69
Console(config-if)#map ip precedence 1 cos 0 3-127
Console(config-if)#end
Console#show map ip precedence ethernet 1/5 3-131
Precedence mapping status: disabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 5 0 0
Eth 1/ 5 1 0
Eth 1/ 5 2 2
Eth 1/ 5 3 3
Eth 1/ 5 4 4
Eth 1/ 5 5 5
Eth 1/ 5 6 6
Eth 1/ 5 7 7
Console#
2-61