TigerSwitch 10/100/1000 - SMC

Configuring the global settings for STA
SPANNING TREE PROTOCOL CONFIGURATION
Web – Click STA/STA Configuration. Modify the required attributes, click
“Apply.”
CLI – This example enables Spanning Tree Protocol, and then sets the
indicated attributes.
Console(config)#bridge 1 spanning-tree 3-85
Console(config)#bridge 1 priority 40000 3-88
Console(config)#bridge 1 hello-time 5 3-87
Console(config)#bridge 1 max-age 40 3-87
Console(config)#bridge 1 forward-time 20 3-86
Managing STA Interface Settings
You can configure STA attributes for specific interfaces, including port
priority, path cost, and fast forwarding. You may use a different priority or
path cost for ports of same media type to indicate the preferred path.
Command Attributes
The following global attributes are read-only and cannot be changed:
• Port Status – Displays current state of this port within the Spanning
Tree:
2-37