TigerSwitch 10/100/1000 - SMC

ip igmp snooping
IGMP SNOOPING COMMANDS
Command Function Mode Page
ip igmp snooping
query-interval
Configures the query interval GC 3-116
ip igmp snooping
query-max-response-ti
me
Configures the report delay GC 3-117
ip igmp snooping
query-time-out
Configures the query timeout GC 3-118
show ip igmp snooping Shows the IGMP snooping configuration PE
Mulitcast Router Commands
3-113
ip igmp snooping vlan
mrouter
Adds a multicast router port GC 3-119
show ip igmp snooping
mrouter
Shows multicast router ports PE 3-120
Use this command to enable IGMP snooping on this switch. Use the no
form to disable it.
Syntax
ip igmp snooping
no ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Console(config)#ip igmp snooping
Console(config)#
3-111