TigerSwitch 10/100/1000 - SMC

vlan database
VLAN COMMANDS
Command Function Mode Page
Display VLAN Information
show vlan Shows VLAN information NE,
PE
3-104
show interfaces status Displays status for the specified VLAN NE, 3-76
vlan
interface
PE
show interfaces Displays the administrative and NE, 3-78
switchport
operational status of an interface PE
Use this command to enter VLAN database mode. All commands in this
mode will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the show vlan command.
•Use the interface vlan command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these
commands are written to the running-configuration file, and you can
display this file by entering the show running-config command.
Example
Console(config)#vlan database
Console(config-vlan)#
Related Commands
show vlan
3-95