TigerSwitch 10/100/1000 - SMC

GVRP AND BRIDGE EXTENSION COMMANDS
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command
Interface Commands
Function Mode Page
switchport gvrp Enables GVRP for an interface IC 3-105
switchport forbidden vlan Configures forbidden VLANs for an
interface
IC 3-103
show gvrp configuration Displays GVRP configuration for NE, 3-106
selected interface
PE
garp timer Sets the GARP timer for the selected
function
IC 3-107
show garp timer Shows the GARP timer for the NE, 3-108
Global Commands
selected function
PE
bridge-ext gvrp Enables GVRP globally for the
switch
GC 3-109
show bridge-ext Shows bridge extension configuration PE 3-109
switchport gvrp
Use this command to enable GVRP for a port. Use the no form to disable
it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Disabled
3-105