TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
VLAN Commands
3-94
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command
Edit VLAN Groups
Function Mode Page
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 3-95
vlan Configures a VLAN, including VID,
name and state
VC 3-96
Configure VLAN Interfaces
interface vlan Enters interface configuration mode for
specified VLAN
IC 3-97
switchport mode Configures VLAN membership mode
for an interface
IC 3-98
switchport
Configures frame types to be accepted by IC 3-99
acceptable-frame-types an interface
swicthport
ingress-filtering
Enables ingress filtering on an interface IC 3-100
switchport native vlan Configures the PVID (native VLAN) of
an interface
IC 3-101
switchport allowed vlan Configures the VLANs associated with
an interface
IC 3-102
switchport gvrp Enables GVRP for an interface IC 3-105
switchport forbidden Configures forbidden VLANs for an IC 3-103
vlan
interface