TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
3-28
Command Usage
The encrypted password is required for compatiblity with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable
jumbo frame
Use this command to enable jumbo frames through the switch. Use the no
form to disable jumbo frames.
Syntax
jumbo frame
no jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This switch provides more efficient throughput for large sequential
data transfers by supporting jumbo frames up to 9000 bytes. Compared
to standard Ethernet frames that run only up to 1.5 KB, using jumbo
frames significantly reduces the per-packet overhead required to
process protocol encapsulation fields.