TigerSwitch 10/100/1000 - SMC

eload
Command Mode
Normal Exec, Privileged Exec
Command Usage
GENERAL COMMANDS
The history buffer size is fixed at 20 commands.
Example
In this example, the show history command lists the contents of the
command history buffer:
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
The ! command repeats commands from the Execution command history
buffer when you are in Normal Exec or Privileged Exec Mode, and
commands from the Configuration command history buffer when you are
in any of the configuration modes. In this example, the !2 command
repeats the second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#
Use this command to restart the system.
Note: When the system is restarted, it will always run the Power-On
Self-Test. It will also retain all configuration information stored in
non-volatile memory by the copy running-config startup-config
command.
3-15