TigerSwitch 10/100/1000 - SMC

adius-server port
RADIUS CLIENT COMMANDS
Use this command to set the RADIUS server network port. Use the no
form to restore the default.
Syntax
radius-server port port_number
no radius-server port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server port 181
Console(config)#
radius-server key
Use this command to set the RADIUS encryption key. Use the no form to
restore the default.
Syntax
radius-server key key_string
no radius-server key
key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 20
characters)
Default Setting
None
3-41